Virtually any attachment to the mountain skiing production leading manufacturers, which are (in alphabetical order, all of the mounting work perfectly and make a choice - deal your taste) 

Atomic (almost exactly the same design and are fixing Dynamic), Fischer (attachment produces Concern Salomon), LOOK (a developer and manufacturer of Rossignol), Marker, Rossignol, Salomon, Tyrolia, Vist (this attachment also produced under the brands Movement, Bogner and others) is suitable to you on a scale of effort. The force response, you need should be close to the middle of the scale. For example, if you push the response - "6", you perfectly fit attachment with the scale of 3 to 9, if the "8 - 9, it is better to buy the attachment to the scale of 5 to 12 or 15. Less common, but this does not become less reliable fastening Nordica. 
How to adjust the attachment, and that they need to do? 

Reliable fastenings - the foundation of your security. Fastenings must ensure reliable communications with the ski boot in the allowable load on the leg and let go when it exceeds a set threshold. 

The most dangerous pressure on his leg - screw. With this load the front head attachment shall relieve toe shoe sideways. Screw pressure compounded pressure on the toe up or down, the vibration, they can be sharp or smooth. Reduce the load on the spiral leg with such complex falls easy on this focused effort of designers and anchorages ... your money. 

The second line of the response required - freeing heel shoe dropping forward. Security in this normally reliably achieved in all models of anchorages, issued within the past 15 years. 

More and more models allow anchorage release sock boot up at any angle, ie, in 180 degrees. It may be necessary during flights and handspring in the loose snow, as well as for skiers with a weak physical education. Installed on ski attachment must be configured to your shoes and your feet. For the anchorage shoes must be pinned to the head with some effort. Therefore, for the other shoe soles in length (the number usually located on the lateral heel), it was moved by heel fastenings. This is usually easily done with the help of lock step, or (in some models) Screw. Just one look like the experienced skier, and you can whip attachment under different shoes. Many models have a simple indicator Clamps in the form of tags, which should fall into the window when inserted boots. If the indicator is not enough to put back so that the heel shoe became the pedal disclosed backdrop, referring to the portion of attachment, which impinges on the sole at the rear of buckling up in the state (of course, with the toe shoe is desirable to insert in the head anchorages). Setting range of simple universal anchorage - not less than 24 mm, often - 28-30 mm, there are models with 40 mm and finally special modifications for rentals (rental) are adapted for any length of sole. The length of the underside is determined not only by the size of shoes, but also technological and design features shoe. 

The force response of anchorages installed by adjusting screws. It is measured in standard DIN. At the head of anchorages - scale screw load, wear push the vertical operation is determined by the same 

scale on their heels - the efforts at falling forward. Adjust the force response is best with the help of ski-master, or on the tables annexed to the fixture. If it is not at hand, you can use proven in practice scheme. Divide your weight by 10, and Take away 20%. Beginners and older skiers - 30%. Advanced skiers - 0%. Place this figure on all four scales, from the start. If not - pick up quickly. Anchorages burst usually occurs from falling down, but you can fall down, not load the attachment, or vice versa, 

create a powerful force, standing on the ground. If you lose the normal skating skis, put force on the 1 / 4 - 1 / 3 division. At the beginning of the season, the heavy wet snow, if you're not in a form that is further weakening in the 10-20% of all: it is better then tighten than injured. Tightening the DIN 10 and is available only to those who are well aware that at all. Keep in mind that the force response can be markedly menyatsya depending on the efforts Clamps shoe toward the front of the head fastenings, be careful, and if you are not sure that your attachment adjusted correctly, it is better to contact the studio or at least in Horsham with a point Rental advice. More information about setting anchorages can be found in the section "Equipment". 

Bindings do not like spring mud and road salt. Do not use for cleaning solvents, cleaning agents and hot water. And the cold water they are not afraid. When gently handling attachment even after 4-5 seasons do not require lubrication, and may be to serve more than 15 years. Bindings like to have their pryskali protective silicone spray. Coupled ski brake carrier, slide the little one lyzhu, reduce their skolzyachkami together and gently slide skis before linking, use the "lipuchki to bind - it will extend the life of ski footsteps and Kant. 

At the present time, Russia has become available to the service of the response effort of attachment to a special stand. If the attachment is not new - is washed away to check how the efforts of the passport issued - we have the legs a bit.